back to quodlibet

This commit is contained in:
Felix Van der Jeugt 2017-08-30 11:53:31 +02:00
parent b6c5722272
commit b858d410ef
No known key found for this signature in database
GPG Key ID: 58B209295023754D
5 changed files with 0 additions and 1338 deletions

View File

@ -1,6 +0,0 @@
database
log
pid
state
sticker.sql
playlists

View File

@ -1,422 +0,0 @@
# An example configuration file for MPD.
# Read the user manual for documentation: http://www.musicpd.org/doc/user/
# Files and directories #######################################################
#
# This setting controls the top directory which MPD will search to discover the
# available audio files and add them to the daemon's online database. This
# setting defaults to the XDG directory, otherwise the music directory will be
# be disabled and audio files will only be accepted over ipc socket (using
# file:// protocol) or streaming files over an accepted protocol.
#
#music_directory "~/music"
music_directory "/data/music/"
#
# This setting sets the MPD internal playlist directory. The purpose of this
# directory is storage for playlists created by MPD. The server will use
# playlist files not created by the server but only if they are in the MPD
# format. This setting defaults to playlist saving being disabled.
#
#playlist_directory "~/.mpd/playlists"
playlist_directory "~/.config/mpd/playlists"
#
# This setting sets the location of the MPD database. This file is used to
# load the database at server start up and store the database while the
# server is not up. This setting defaults to disabled which will allow
# MPD to accept files over ipc socket (using file:// protocol) or streaming
# files over an accepted protocol.
#
#db_file "~/.mpd/database"
db_file "~/.config/mpd/database"
#
# These settings are the locations for the daemon log files for the daemon.
# These logs are great for troubleshooting, depending on your log_level
# settings.
#
# The special value "syslog" makes MPD use the local syslog daemon. This
# setting defaults to logging to syslog, otherwise logging is disabled.
#
#log_file "~/.mpd/log"
log_file "~/.config/mpd/log"
#
# This setting sets the location of the file which stores the process ID
# for use of mpd --kill and some init scripts. This setting is disabled by
# default and the pid file will not be stored.
#
#pid_file "~/.mpd/pid"
pid_file "~/.config/mpd/pid"
#
# This setting sets the location of the file which contains information about
# most variables to get MPD back into the same general shape it was in before
# it was brought down. This setting is disabled by default and the server
# state will be reset on server start up.
#
#state_file "~/.mpd/state"
state_file "~/.config/mpd/state"
#
# The location of the sticker database. This is a database which
# manages dynamic information attached to songs.
#
#sticker_file "~/.mpd/sticker.sql"
sticker_file "~/.config/mpd/sticker.sql"
#
###############################################################################
# General music daemon options ################################################
#
# This setting specifies the user that MPD will run as. MPD should never run as
# root and you may use this setting to make MPD change its user ID after
# initialization. This setting is disabled by default and MPD is run as the
# current user.
#
#user "nobody"
#
# This setting specifies the group that MPD will run as. If not specified
# primary group of user specified with "user" setting will be used (if set).
# This is useful if MPD needs to be a member of group such as "audio" to
# have permission to use sound card.
#
#group "nogroup"
#
# This setting sets the address for the daemon to listen on. Careful attention
# should be paid if this is assigned to anything other then the default, any.
# This setting can deny access to control of the daemon.
#
# For network
#bind_to_address "any"
#
# And for Unix Socket
#bind_to_address "~/.mpd/socket"
#
# This setting is the TCP port that is desired for the daemon to get assigned
# to.
#
#port "6600"
#
# This setting controls the type of information which is logged. Available
# setting arguments are "default", "secure" or "verbose". The "verbose" setting
# argument is recommended for troubleshooting, though can quickly stretch
# available resources on limited hardware storage.
#
#log_level "default"
#
# If you have a problem with your MP3s ending abruptly it is recommended that
# you set this argument to "no" to attempt to fix the problem. If this solves
# the problem, it is highly recommended to fix the MP3 files with vbrfix
# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
# point gapless MP3 playback can be enabled.
#
#gapless_mp3_playback "yes"
#
# Setting "restore_paused" to "yes" puts MPD into pause mode instead
# of starting playback after startup.
#
#restore_paused "no"
#
# This setting enables MPD to create playlists in a format usable by other
# music players.
#
#save_absolute_paths_in_playlists "no"
#
# This setting defines a list of tag types that will be extracted during the
# audio file discovery process. The complete list of possible values can be
# found in the mpd.conf man page.
#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
#
# This setting enables automatic update of MPD's database when files in
# music_directory are changed.
#
#auto_update "yes"
#
# Limit the depth of the directories being watched, 0 means only watch
# the music directory itself. There is no limit by default.
#
#auto_update_depth "3"
#
###############################################################################
# Symbolic link behavior ######################################################
#
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links outside of the configured music_directory.
#
#follow_outside_symlinks "yes"
#
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links inside of the configured music_directory.
#
#follow_inside_symlinks "yes"
#
###############################################################################
# Zeroconf / Avahi Service Discovery ##########################################
#
# If this setting is set to "yes", service information will be published with
# Zeroconf / Avahi.
#
#zeroconf_enabled "yes"
#
# The argument to this setting will be the Zeroconf / Avahi unique name for
# this MPD server on the network.
#
#zeroconf_name "Music Player"
#
###############################################################################
# Permissions #################################################################
#
# If this setting is set, MPD will require password authorization. The password
# can setting can be specified multiple times for different password profiles.
#
#password "password@read,add,control,admin"
#
# This setting specifies the permissions a user has who has not yet logged in.
#
#default_permissions "read,add,control,admin"
#
###############################################################################
# Database #######################################################################
#
#database {
# plugin "proxy"
# host "other.mpd.host"
# port "6600"
#}
# Input #######################################################################
#
input {
plugin "curl"
# proxy "proxy.isp.com:8080"
# proxy_user "user"
# proxy_password "password"
}
#
###############################################################################
# Audio Output ################################################################
#
# MPD supports various audio output types, as well as playing through multiple
# audio outputs at the same time, through multiple audio_output settings
# blocks. Setting this block is optional, though the server will only attempt
# autodetection for one sound card.
#
# An example of an ALSA output:
#
audio_output {
type "alsa"
name "My ALSA Device"
## device "hw:0,0" # optional
## mixer_type "hardware" # optional
## mixer_device "default" # optional
## mixer_control "PCM" # optional
## mixer_index "0" # optional
}
#
# An example of an OSS output:
#
#audio_output {
# type "oss"
# name "My OSS Device"
## device "/dev/dsp" # optional
## mixer_type "hardware" # optional
## mixer_device "/dev/mixer" # optional
## mixer_control "PCM" # optional
#}
#
# An example of a shout output (for streaming to Icecast):
#
#audio_output {
# type "shout"
# encoding "ogg" # optional
# name "My Shout Stream"
# host "localhost"
# port "8000"
# mount "/mpd.ogg"
# password "hackme"
# quality "5.0"
# bitrate "128"
# format "44100:16:1"
## protocol "icecast2" # optional
## user "source" # optional
## description "My Stream Description" # optional
## url "http://example.com" # optional
## genre "jazz" # optional
## public "no" # optional
## timeout "2" # optional
## mixer_type "software" # optional
#}
#
# An example of a recorder output:
#
#audio_output {
# type "recorder"
# name "My recorder"
# encoder "vorbis" # optional, vorbis or lame
# path "/var/lib/mpd/recorder/mpd.ogg"
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
#}
#
# An example of a httpd output (built-in HTTP streaming server):
#
#audio_output {
# type "httpd"
# name "My HTTP Stream"
# encoder "vorbis" # optional, vorbis or lame
# port "8000"
# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
# max_clients "0" # optional 0=no limit
#}
#
# An example of a pulseaudio output (streaming to a remote pulseaudio server)
#
#audio_output {
# type "pulse"
# name "My Pulse Output"
## server "remote_server" # optional
## sink "remote_server_sink" # optional
#}
#
# An example of a winmm output (Windows multimedia API).
#
#audio_output {
# type "winmm"
# name "My WinMM output"
## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
# or
## device "0" # optional
## mixer_type "hardware" # optional
#}
#
# An example of an openal output.
#
#audio_output {
# type "openal"
# name "My OpenAL output"
## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
#}
#
## Example "pipe" output:
#
#audio_output {
# type "pipe"
# name "my pipe"
# command "aplay -f cd 2>/dev/null"
## Or if you're want to use AudioCompress
# command "AudioCompress -m | aplay -f cd 2>/dev/null"
## Or to send raw PCM stream through PCM:
# command "nc example.org 8765"
# format "44100:16:2"
#}
#
## An example of a null output (for no audio output):
#
#audio_output {
# type "null"
# name "My Null Output"
# mixer_type "none" # optional
#}
#
# If MPD has been compiled with libsamplerate support, this setting specifies
# the sample rate converter to use. Possible values can be found in the
# mpd.conf man page or the libsamplerate documentation. By default, this is
# setting is disabled.
#
#samplerate_converter "Fastest Sinc Interpolator"
#
###############################################################################
# Normalization automatic volume adjustments ##################################
#
# This setting specifies the type of ReplayGain to use. This setting can have
# the argument "off", "album", "track" or "auto". "auto" is a special mode that
# chooses between "track" and "album" depending on the current state of
# random playback. If random playback is enabled then "track" mode is used.
# See <http://www.replaygain.org> for more details about ReplayGain.
# This setting is off by default.
#
#replaygain "album"
replaygain "auto"
#
# This setting sets the pre-amp used for files that have ReplayGain tags. By
# default this setting is disabled.
#
#replaygain_preamp "0"
#
# This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
# By default this setting is disabled.
#
#replaygain_missing_preamp "0"
#
# This setting enables or disables ReplayGain limiting.
# MPD calculates actual amplification based on the ReplayGain tags
# and replaygain_preamp / replaygain_missing_preamp setting.
# If replaygain_limit is enabled MPD will never amplify audio signal
# above its original level. If replaygain_limit is disabled such amplification
# might occur. By default this setting is enabled.
#
#replaygain_limit "yes"
#
# This setting enables on-the-fly normalization volume adjustment. This will
# result in the volume of all playing audio to be adjusted so the output has
# equal "loudness". This setting is disabled by default.
#
#volume_normalization "no"
#
###############################################################################
# Character Encoding ##########################################################
#
# If file or directory names do not display correctly for your locale then you
# may need to modify this setting.
#
#filesystem_charset "UTF-8"
#
# This setting controls the encoding that ID3v1 tags should be converted from.
#
#id3v1_encoding "ISO-8859-1"
#
###############################################################################
# SIDPlay decoder #############################################################
#
# songlength_database:
# Location of your songlengths file, as distributed with the HVSC.
# The sidplay plugin checks this for matching MD5 fingerprints.
# See http://www.c64.org/HVSC/DOCUMENTS/Songlengths.faq
#
# default_songlength:
# This is the default playing time in seconds for songs not in the
# songlength database, or in case you're not using a database.
# A value of 0 means play indefinitely.
#
# filter:
# Turns the SID filter emulation on or off.
#
#decoder {
# plugin "sidplay"
# songlength_database "/media/C64Music/DOCUMENTS/Songlengths.txt"
# default_songlength "120"
# filter "true"
#}
#
###############################################################################

View File

@ -1 +0,0 @@
error.log

View File

@ -1,568 +0,0 @@
##########################################################
## this is example bindings configuration file, copy it ##
## to ~/.ncmpcpp/bindings and set up your preferences ##
##########################################################
##
##### General rules #####
##
## 1) Because each action has runtime checks whether it's
## ok to run it, a few actions can be bound to one key.
## Actions will be bound in order given in configuration
## file. When a key is pressed, first action in order
## will test itself whether it's possible to run it. If
## test succeeds, action is executed and other actions
## bound to this key are ignored. If it doesn't, next
## action in order tests itself etc.
##
## 2) It's possible to bind more that one action at once
## to a key. It can be done using the following syntax:
##
## def_key "key"
## action1
## action2
## ...
##
## This creates a chain of actions. When such chain is
## executed, each action in chain is run until the end of
## chain is reached or one of its actions fails to execute
## due to its requirements not being met. If multiple actions
## and/or chains are bound to the same key, they will be
## consecutively run until one of them gets fully executed.
##
## 3) When ncmpcpp starts, bindings configuration file is
## parsed and then ncmpcpp provides "missing pieces"
## of default keybindings. If you want to disable some
## bindings, there is a special action called 'dummy'
## for that purpose. Eg. if you want to disable ability
## to crop playlists, you need to put the following
## into configuration file:
##
## def_key "C"
## dummy
##
## After that ncmpcpp will not bind any default action
## to this key.
##
## 4) To let you write simple macros, the following special
## actions are provided:
##
## - push_character "character" - pushes given special
## character into input queue, so it will be immediately
## picked by ncmpcpp upon next call to readKey function.
## Accepted values: mouse, up, down, page_up, page_down,
## home, end, space, enter, insert, delete, left, right,
## tab, ctrl-a, ctrl-b, ..., ctrl-z, ctrl-[, ctrl-\\,
## ctrl-], ctrl-^, ctrl-_, f1, f2, ..., f12, backspace.
## In addition, most of these names can be prefixed with
## alt-/ctrl-/shift- to be recognized with the appropriate
## modifier key(s).
##
## - push_characters "string" - pushes given string into
## input queue.
##
## - require_runnable "action" - checks whether given action
## is runnable and fails if it isn't. This is especially
## useful when mixed with previous two functions. Consider
## the following macro definition:
##
## def_key "key"
## push_characters "custom_filter"
## apply_filter
##
## If apply_filter can't be currently run, we end up with
## sequence of characters in input queue which will be
## treated just as we typed them. This may lead to unexpected
## results (in this case 'c' will most likely clear current
## playlist, 'u' will trigger database update, 's' will stop
## playback etc.). To prevent such thing from happening, we
## need to change above definition to this one:
##
## def_key "key"
## require_runnable "apply_filter"
## push_characters "custom_filter"
## apply_filter
##
## Here, first we test whether apply_filter can be actually run
## before we stuff characters into input queue, so if condition
## is not met, whole chain is aborted and we're fine.
##
## - require_screen "screen" - checks whether given screen is
## currently active. accepted values: browser, clock, help,
## media_library, outputs, playlist, playlist_editor,
## search_engine, tag_editor, visualizer, last_fm, lyrics,
## selected_items_adder, server_info, song_info,
## sort_playlist_dialog, tiny_tag_editor.
##
## - run_external_command "command" - runs given command using
## system() function.
##
## 5) In addition to binding to a key, you can also bind actions
## or chains of actions to a command. If it comes to commands,
## syntax is very similar to defining keys. Here goes example
## definition of a command:
##
## def_command "quit" [deferred]
## stop
## quit
##
## If you execute the above command (which can be done by
## invoking action execute_command, typing 'quit' and pressing
## enter), ncmpcpp will stop the player and then quit. Note the
## presence of word 'deferred' enclosed in square brackets. It
## tells ncmpcpp to wait for confirmation (ie. pressing enter)
## after you typed quit. Instead of 'deferred', 'immediate'
## could be used. Then ncmpcpp will not wait for confirmation
## (enter) and will execute the command the moment it sees it.
##
## Note: while command chains are executed, internal environment
## update (which includes current window refresh and mpd status
## update) is not performed for performance reasons. However, it
## may be desirable to do so in some situration. Therefore it's
## possible to invoke by hand by performing 'update enviroment'
## action.
##
## Note: There is a difference between:
##
## def_key "key"
## action1
##
## def_key "key"
## action2
##
## and
##
## def_key "key"
## action1
## action2
##
## First one binds two single actions to the same key whilst
## second one defines a chain of actions. The behavior of
## these two is different and is described in (1) and (2).
##
## Note: Function def_key accepts non-ascii characters.
##
##### List of unbound actions #####
##
## The following actions are not bound to any key/command:
##
## - set_volume
##
#
#def_key "mouse"
# mouse_event
#
#def_key "up"
# scroll_up
def_key "k"
scroll_up
#
#def_key "shift-up"
# select_item
# scroll_up
#
#def_key "down"
# scroll_down
def_key "j"
scroll_down
#
#def_key "shift-down"
# select_item
# scroll_down
#
#def_key "["
# scroll_up_album
#
#def_key "]"
# scroll_down_album
#
#def_key "{"
# scroll_up_artist
#
#def_key "}"
# scroll_down_artist
#
#def_key "page_up"
# page_up
#
#def_key "page_down"
# page_down
#
#def_key "home"
# move_home
def_key "h"
require_screen "browser"
move_home
enter_directory
#
#def_key "end"
# move_end
#
#def_key "insert"
# select_item
#
#def_key "enter"
# enter_directory
def_key "l"
require_screen "browser"
enter_directory
#
#def_key "enter"
# toggle_output
#
#def_key "enter"
# run_action
#
#def_key "enter"
# play_item
#
def_key "space"
require_screen "playlist"
select_item
scroll_down
def_key "space"
add_item_to_playlist
def_key "insert"
select_item
scroll_down
#
#def_key "space"
# toggle_lyrics_update_on_song_change
#
#def_key "space"
# toggle_visualization_type
#
#def_key "delete"
# delete_playlist_items
#
#def_key "delete"
# delete_browser_items
#
#def_key "delete"
# delete_stored_playlist
#
def_key "d"
delete_playlist_items
def_key "d"
delete_browser_items
def_key "d"
delete_stored_playlist
#
#def_key "right"
# next_column
#
#def_key "right"
# slave_screen
#
#def_key "right"
# volume_up
#
#def_key "+"
# volume_up
#
#def_key "left"
# previous_column
#
#def_key "left"
# master_screen
#
#def_key "left"
# volume_down
#
#def_key "-"
# volume_down
#
#def_key ":"
# execute_command
#
#def_key "tab"
# next_screen
#
#def_key "shift-tab"
# previous_screen
#
#def_key "f1"
# show_help
#
#def_key "1"
# show_playlist
#
#def_key "2"
# show_browser
#
#def_key "2"
# change_browse_mode
#
#def_key "3"
# show_search_engine
#
#def_key "3"
# reset_search_engine
#
#def_key "4"
# show_media_library
#
#def_key "4"
# toggle_media_library_columns_mode
#
#def_key "5"
# show_playlist_editor
#
#def_key "6"
# show_tag_editor
#
#def_key "7"
# show_outputs
#
#def_key "8"
# show_visualizer
#
#def_key "="
# show_clock
#
#def_key "@"
# show_server_info
#
#def_key "s"
# stop
#
#def_key "p"
# pause
#
#def_key ">"
# next
#
#def_key "<"
# previous
#
#def_key "ctrl-h"
# jump_to_parent_directory
#
#def_key "ctrl-h"
# replay_song
#
#def_key "backspace"
# jump_to_parent_directory
#
#def_key "backspace"
# replay_song
#
#def_key "f"
# seek_forward
#
#def_key "b"
# seek_backward
#
#def_key "r"
# toggle_repeat
#
#def_key "z"
# toggle_random
#
#def_key "y"
# save_tag_changes
#
#def_key "y"
# start_searching
#
#def_key "y"
# toggle_single
#
#def_key "R"
# toggle_consume
#
#def_key "Y"
# toggle_replay_gain_mode
#
#def_key "T"
# toggle_add_mode
#
#def_key "|"
# toggle_mouse
#
#def_key "#"
# toggle_bitrate_visibility
#
#def_key "Z"
# shuffle
#
#def_key "x"
# toggle_crossfade
#
#def_key "X"
# set_crossfade
#
#def_key "u"
# update_database
#
#def_key "ctrl-s"
# sort_playlist
#
#def_key "ctrl-s"
# toggle_browser_sort_mode
#
#def_key "ctrl-s"
# toggle_media_library_sort_mode
#
#def_key "ctrl-r"
# reverse_playlist
#
#def_key "ctrl-_"
# select_found_items
#
#def_key "/"
# find
#
#def_key "/"
# find_item_forward
#
#def_key "?"
# find
#
#def_key "?"
# find_item_backward
#
#def_key "."
# next_found_item
#
#def_key ","
# previous_found_item
#
#def_key "w"
# toggle_find_mode
#
#def_key "e"
# edit_song
#
#def_key "e"
# edit_library_tag
#
#def_key "e"
# edit_library_album
#
#def_key "e"
# edit_directory_name
#
#def_key "e"
# edit_playlist_name
#
#def_key "e"
# edit_lyrics
#
#def_key "i"
# show_song_info
#
#def_key "I"
# show_artist_info
#
#def_key "g"
# jump_to_position_in_song
#
#def_key "l"
# show_lyrics
#
#def_key "ctrl-v"
# select_range
#
#def_key "v"
# reverse_selection
#
#def_key "V"
# remove_selection
#
#def_key "B"
# select_album
#
#def_key "a"
# add_selected_items
#
#def_key "c"
# clear_playlist
#
#def_key "c"
# clear_main_playlist
#
#def_key "C"
# crop_playlist
#
#def_key "C"
# crop_main_playlist
#
#def_key "m"
# move_sort_order_up
#
#def_key "m"
# move_selected_items_up
#
#def_key "m"
# set_visualizer_sample_multiplier
#
#def_key "n"
# move_sort_order_down
#
#def_key "n"
# move_selected_items_down
#
#def_key "M"
# move_selected_items_to
#
#def_key "A"
# add
#
#def_key "S"
# save_playlist
#
#def_key "o"
# jump_to_playing_song
#
#def_key "G"
# jump_to_browser
#
#def_key "G"
# jump_to_playlist_editor
#
#def_key "~"
# jump_to_media_library
#
#def_key "E"
# jump_to_tag_editor
#
#def_key "U"
# toggle_playing_song_centering
#
#def_key "P"
# toggle_display_mode
#
#def_key "\\"
# toggle_interface
#
#def_key "!"
# toggle_separators_between_albums
#
#def_key "L"
# toggle_lyrics_fetcher
#
#def_key "F"
# toggle_fetching_lyrics_in_background
#
#def_key "ctrl-l"
# toggle_screen_lock
#
#def_key "`"
# toggle_library_tag_type
#
#def_key "`"
# refetch_lyrics
#
#def_key "`"
# add_random_items
#
#def_key "ctrl-p"
# set_selected_items_priority
#
#def_key "q"
# quit
#

View File

@ -1,341 +0,0 @@
####################################################
## this is example configuration file, copy it to ##
## ~/.ncmpcpp/config and set up your preferences ##
####################################################
##### directories ###### {{{
## Directory for storing ncmpcpp related files.
## Changing it is useful if you want to store
## everything somewhere else and provide command
## line setting for alternative location to config
## file which defines that while launching ncmpcpp.
ncmpcpp_directory = ~/.config/ncmpcpp
## Directory for storing downloaded lyrics. It
## defaults to ~/.lyrics since other MPD clients
## (eg. ncmpc) also use that location.
#lyrics_directory = ~/.lyrics
# }}}
##### connection settings ##### {{{
#mpd_host = localhost
#mpd_port = 6600
#mpd_connection_timeout = 5
## Needed for tag editor and file operations to work.
mpd_music_dir = /data/music
#mpd_crossfade_time = 5
# }}}
##### music visualizer ##### {{{
## Note: In order to make music visualizer work you'll
## need to use mpd fifo output, whose format parameter
## has to be set to 44100:16:1 for mono visualization
## or 44100:16:2 for stereo visualization. Example
## configuration (it has to be put into mpd.conf):
##
## audio_output {
## type "fifo"
## name "Visualizer feed"
## path "/tmp/mpd.fifo"
## format "44100:16:2"
## }
#visualizer_fifo_path = /tmp/mpd.fifo
## Note: Below parameter is needed for ncmpcpp
## to determine which output provides data for
## visualizer and thus allow syncing between
## visualization and sound as currently there
## are some problems with it.
#visualizer_output_name = Visualizer feed
## If you set format to 44100:16:2, make it 'yes'.
#visualizer_in_stereo = yes
## Multiply received samples by given value. Very
## useful for proper visualization of quiet music.
#visualizer_sample_multipler = 1
## Note: Below parameter defines how often ncmpcpp
## has to "synchronize" visualizer and audio outputs.
## 30 seconds is optimal value, but if you experience
## synchronization problems, set it to lower value.
## Keep in mind that sane values start with >=10.
#visualizer_sync_interval = 30
## Note: To enable spectrum frequency visualization
## you need to compile ncmpcpp with fftw3 support.
## Available values: spectrum, wave.
#visualizer_type = wave
#visualizer_look = ●▮
# }}}
##### system encoding ##### {{{
## ncmpcpp should detect your charset encoding
## but if it failed to do so, you can specify
## charset encoding you are using here.
##
## Note: You can see whether your ncmpcpp build
## supports charset detection by checking output
## of `ncmpcpp --version`.
##
## Note: Since MPD uses UTF-8 by default, setting
## this option makes sense only if your encoding
## is different.
#system_encoding = ""
# }}}
##### delays ##### {{{
## Time of inactivity (in seconds) after playlist
## highlighting will be disabled (0 = always on).
#playlist_disable_highlight_delay = 5
## Defines how long messages are supposed to be visible.
#message_delay_time = 5
# }}}
##### song format ##### {{{
## for song format you can use:
##
## %l - length
## %f - filename
## %D - directory
## %a - artist
## %A - album artist
## %t - title
## %b - album
## %y - date
## %n - track number (01/12 -> 01)
## %N - full track info (01/12 -> 01/12)
## %g - genre
## %c - composer
## %p - performer
## %d - disc
## %C - comment
## %P - priority
## $R - begin right alignment
##
## you can also put them in { } and then it will be displayed
## only if all requested values are available and/or define alternate
## value with { }|{ } eg. {%a - %t}|{%f}
##
## Note: If you want to set limit on maximal length of a tag, just
## put the appropriate number between % and character that defines
## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
##
## Note: Format that is similar to "%a - %t" (i.e. without any additional
## braces) is equal to "{%a - %t}", so if one of the tags is missing,
## you'll get nothing.
##
## text can also have different color than the main window has,
## eg. if you want length to be green, write "$3%l$9".
##
## Available values:
##
## - 0 - default window color (discards all other colors)
## - 1 - black
## - 2 - red
## - 3 - green
## - 4 - yellow
## - 5 - blue
## - 6 - magenta
## - 7 - cyan
## - 8 - white
## - 9 - end of current color
##
## Note: colors can be nested.
#song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
#song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
#song_library_format = {%n - }{%t}|{%f}
#tag_editor_album_format = {(%y) }%b
## Note: Below variables are used for sorting songs in browser.
## The sort mode determines how songs are sorted, and can be used
## in combination with a sort format to specify a custom sorting format.
## Available values for browser_sort_mode are "name", "mtime", "format"
## and "noop".
#browser_sort_mode = name
#browser_sort_format = {%a - }{%t}|{%f} {(%l)}
## Note: Below variables are for alternative version of user's interface.
## Their syntax supports all tags and colors listed above plus some extra
## markers used for text attributes. They are followed by character '$'.
## After that you can put:
##
## - b - bold text
## - u - underline text
## - r - reverse colors
## - a - use alternative character set
##
## If you don't want to use an attribute anymore, just put it again, but
## this time insert character '/' between '$' and attribute character,
## e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag or filename
## with reversed colors.
#alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
#alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
## Note: below variables also support text attributes listed above.
#now_playing_prefix = $b
#now_playing_suffix = $/b
#browser_playlist_prefix = "$2playlist$9 "
#selected_item_prefix = $6
#selected_item_suffix = $9
#modified_item_prefix = $3> $9
## Note: colors are not supported for below variable.
#song_window_title_format = {%a - }{%t}|{%f}
# }}}
##### columns settings ##### {{{
## syntax of song columns list format is "column column etc."
##
## - syntax for each column is:
##
## (width of column)[column's color]{displayed tag}
##
## Note: Width is by default in %, if you want a column to
## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
## will be the column that take 10% of screen (so the real column's
## width will depend on actual screen size), whereas (10f)[white]{a}
## will take 10 terminal cells, no matter how wide the screen is.
##
## - color is optional (if you want the default one, type [])
##
## Note: You can give a column additional attributes by putting appropriate
## character after displayed tag character. Available attributes are:
##
## - r - column will be right aligned
## - E - if tag is empty, empty tag marker won't be displayed
##
## You can also:
##
## - give a column custom name by putting it after attributes,
## separated with character ':', e.g. {lr:Length} gives you
## right aligned column of lengths named "Length".
##
## - define sequence of tags, that have to be displayed in case
## predecessor is empty in a way similar to the one in classic
## song format, i.e. using '|' character, e.g. {a|c|p:Owner}
## creates column named "Owner" that tries to display artist
## tag and then composer and performer if previous ones are
## not available.
#song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
song_columns_list_format = (16)[]{a} (10f)[green]{NrE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
# }}}
##### various settings ##### {{{
## Note: Custom command that will be executed each
## time song changes. Useful for notifications etc.
##
## Attention: It doesn't support song format anymore.
## Use `ncmpcpp --now-playing SONG_FORMAT` instead.
#execute_on_song_change = ""
#playlist_show_remaining_time = no
#playlist_shorten_total_times = no
#playlist_separate_albums = no
## Note: Possible display modes: classic, columns.
#playlist_display_mode = columns
browser_display_mode = columns
#search_engine_display_mode = classic
#playlist_editor_display_mode = classic
#discard_colors_if_item_is_selected = yes
#incremental_seeking = yes
#seek_time = 1
#volume_change_step = 2
#autocenter_mode = no
#centered_cursor = no
## Note: You can specify third character which will
## be used to build 'empty' part of progressbar.
progressbar_look = =-
progressbar_boldness = no
## Available values: database, playlist.
#default_place_to_search_in = database
## Available values: classic, alternative.
user_interface = alternative
#data_fetching_delay = yes
## Available values: artist, album_artist, date, genre, composer, performer.
media_library_primary_tag = genre
## Available values: wrapped, normal.
#default_find_mode = wrapped
## Available values: add, select.
#default_tag_editor_pattern = %n - %t
#header_visibility = yes
#statusbar_visibility = yes
#titles_visibility = yes
#header_text_scrolling = yes
#cyclic_scrolling = no
#lines_scrolled = 2
#follow_now_playing_lyrics = no
#fetch_lyrics_for_current_song_in_background = no
#store_lyrics_in_song_dir = no
#generate_win32_compatible_filenames = yes
#allow_for_physical_item_deletion = no
## Note: If you set this variable, ncmpcpp will try to
## get info from last.fm in language you set and if it
## fails, it will fall back to english. Otherwise it will
## use english the first time.
##
## Note: Language has to be expressed as an ISO 639 alpha-2 code.
#lastfm_preferred_language = en
## Available values: add_remove, always_add.
#space_add_mode = always_add
#show_hidden_files_in_local_browser = no
## How shall screen switcher work?
## - "previous" - switch between the current and previous screen.
## - "screen1,...,screenN" - switch between given sequence of screens.
##
## Screens available for use: help, playlist, browser, search_engine,
## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
screen_switcher_mode = playlist, media_library
## Note: You can define startup screen for ncmpcpp
## by choosing screen from the list above.
#startup_screen = playlist
## Default width of locked screen (in %).
## Acceptable values are from 20 to 80.
#locked_screen_width_part = 50
#ask_for_locked_screen_width_part = yes
#jump_to_now_playing_song_at_start = yes
#ask_before_clearing_playlists = yes
clock_display_seconds = yes
#display_volume_level = yes
#display_bitrate = no
#display_remaining_time = no
## Available values: none, basic, extended.
#regular_expressions = none
## Note: If below is enabled, ncmpcpp will ignore leading
## "The" word while sorting items in browser, tags in
## media library, etc.
#ignore_leading_the = no
#block_search_constraints_change_if_items_found = yes
mouse_support = no
#mouse_list_scroll_whole_page = yes
#empty_tag_marker = <empty>
#tags_separator = " | "
#tag_editor_extended_numeration = no
#media_library_sort_by_mtime = no
#enable_window_title = yes
## Note: You can choose default search mode for search
## engine. Available modes are:
##
## - 1 - use mpd built-in searching (no regexes, pattern matching)
## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
## but if your mpd is on a remote machine, downloading big database
## to process it can take a while
## - 3 - match only exact values (this mode uses mpd function for searching
## in database and local one for searching in current playlist)
#search_engine_default_search_mode = 1
external_editor = vim
## Note: set to yes if external editor is a console application.
#use_console_editor = yes
# }}}
##### colors definitions ##### {{{
#colors_enabled = yes
#empty_tag_color = cyan
#header_window_color = default
#volume_color = default
#state_line_color = default
#state_flags_color = default
#main_window_color = yellow
#color1 = white
#color2 = green
#main_window_highlight_color = yellow
#progressbar_color = black
#progressbar_elapsed_color = green
#statusbar_color = default
#alternative_ui_separator_color = black
#active_column_color = red
#visualizer_color = yellow
#window_border_color = green
#active_window_border = red
# }}}
# vim: foldmethod=marker