From b858d410ef2f297741df84d3cbf74bb866e2ee81 Mon Sep 17 00:00:00 2001 From: Felix Van der Jeugt Date: Wed, 30 Aug 2017 11:53:31 +0200 Subject: [PATCH] back to quodlibet --- config/mpd/.gitignore | 6 - config/mpd/mpd.conf | 422 ---------------------------- config/ncmpcpp/.gitignore | 1 - config/ncmpcpp/bindings | 568 -------------------------------------- config/ncmpcpp/config | 341 ----------------------- 5 files changed, 1338 deletions(-) delete mode 100644 config/mpd/.gitignore delete mode 100644 config/mpd/mpd.conf delete mode 100644 config/ncmpcpp/.gitignore delete mode 100644 config/ncmpcpp/bindings delete mode 100644 config/ncmpcpp/config diff --git a/config/mpd/.gitignore b/config/mpd/.gitignore deleted file mode 100644 index a8ea207..0000000 --- a/config/mpd/.gitignore +++ /dev/null @@ -1,6 +0,0 @@ -database -log -pid -state -sticker.sql -playlists diff --git a/config/mpd/mpd.conf b/config/mpd/mpd.conf deleted file mode 100644 index 14a384e..0000000 --- a/config/mpd/mpd.conf +++ /dev/null @@ -1,422 +0,0 @@ -# An example configuration file for MPD. -# Read the user manual for documentation: http://www.musicpd.org/doc/user/ - - - -# Files and directories ####################################################### -# -# This setting controls the top directory which MPD will search to discover the -# available audio files and add them to the daemon's online database. This -# setting defaults to the XDG directory, otherwise the music directory will be -# be disabled and audio files will only be accepted over ipc socket (using -# file:// protocol) or streaming files over an accepted protocol. -# -#music_directory "~/music" -music_directory "/data/music/" -# -# This setting sets the MPD internal playlist directory. The purpose of this -# directory is storage for playlists created by MPD. The server will use -# playlist files not created by the server but only if they are in the MPD -# format. This setting defaults to playlist saving being disabled. -# -#playlist_directory "~/.mpd/playlists" -playlist_directory "~/.config/mpd/playlists" -# -# This setting sets the location of the MPD database. This file is used to -# load the database at server start up and store the database while the -# server is not up. This setting defaults to disabled which will allow -# MPD to accept files over ipc socket (using file:// protocol) or streaming -# files over an accepted protocol. -# -#db_file "~/.mpd/database" -db_file "~/.config/mpd/database" -# -# These settings are the locations for the daemon log files for the daemon. -# These logs are great for troubleshooting, depending on your log_level -# settings. -# -# The special value "syslog" makes MPD use the local syslog daemon. This -# setting defaults to logging to syslog, otherwise logging is disabled. -# -#log_file "~/.mpd/log" -log_file "~/.config/mpd/log" -# -# This setting sets the location of the file which stores the process ID -# for use of mpd --kill and some init scripts. This setting is disabled by -# default and the pid file will not be stored. -# -#pid_file "~/.mpd/pid" -pid_file "~/.config/mpd/pid" -# -# This setting sets the location of the file which contains information about -# most variables to get MPD back into the same general shape it was in before -# it was brought down. This setting is disabled by default and the server -# state will be reset on server start up. -# -#state_file "~/.mpd/state" -state_file "~/.config/mpd/state" -# -# The location of the sticker database. This is a database which -# manages dynamic information attached to songs. -# -#sticker_file "~/.mpd/sticker.sql" -sticker_file "~/.config/mpd/sticker.sql" -# -############################################################################### - - -# General music daemon options ################################################ -# -# This setting specifies the user that MPD will run as. MPD should never run as -# root and you may use this setting to make MPD change its user ID after -# initialization. This setting is disabled by default and MPD is run as the -# current user. -# -#user "nobody" -# -# This setting specifies the group that MPD will run as. If not specified -# primary group of user specified with "user" setting will be used (if set). -# This is useful if MPD needs to be a member of group such as "audio" to -# have permission to use sound card. -# -#group "nogroup" -# -# This setting sets the address for the daemon to listen on. Careful attention -# should be paid if this is assigned to anything other then the default, any. -# This setting can deny access to control of the daemon. -# -# For network -#bind_to_address "any" -# -# And for Unix Socket -#bind_to_address "~/.mpd/socket" -# -# This setting is the TCP port that is desired for the daemon to get assigned -# to. -# -#port "6600" -# -# This setting controls the type of information which is logged. Available -# setting arguments are "default", "secure" or "verbose". The "verbose" setting -# argument is recommended for troubleshooting, though can quickly stretch -# available resources on limited hardware storage. -# -#log_level "default" -# -# If you have a problem with your MP3s ending abruptly it is recommended that -# you set this argument to "no" to attempt to fix the problem. If this solves -# the problem, it is highly recommended to fix the MP3 files with vbrfix -# (available from ), at which -# point gapless MP3 playback can be enabled. -# -#gapless_mp3_playback "yes" -# -# Setting "restore_paused" to "yes" puts MPD into pause mode instead -# of starting playback after startup. -# -#restore_paused "no" -# -# This setting enables MPD to create playlists in a format usable by other -# music players. -# -#save_absolute_paths_in_playlists "no" -# -# This setting defines a list of tag types that will be extracted during the -# audio file discovery process. The complete list of possible values can be -# found in the mpd.conf man page. -#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc" -# -# This setting enables automatic update of MPD's database when files in -# music_directory are changed. -# -#auto_update "yes" -# -# Limit the depth of the directories being watched, 0 means only watch -# the music directory itself. There is no limit by default. -# -#auto_update_depth "3" -# -############################################################################### - - -# Symbolic link behavior ###################################################### -# -# If this setting is set to "yes", MPD will discover audio files by following -# symbolic links outside of the configured music_directory. -# -#follow_outside_symlinks "yes" -# -# If this setting is set to "yes", MPD will discover audio files by following -# symbolic links inside of the configured music_directory. -# -#follow_inside_symlinks "yes" -# -############################################################################### - - -# Zeroconf / Avahi Service Discovery ########################################## -# -# If this setting is set to "yes", service information will be published with -# Zeroconf / Avahi. -# -#zeroconf_enabled "yes" -# -# The argument to this setting will be the Zeroconf / Avahi unique name for -# this MPD server on the network. -# -#zeroconf_name "Music Player" -# -############################################################################### - - -# Permissions ################################################################# -# -# If this setting is set, MPD will require password authorization. The password -# can setting can be specified multiple times for different password profiles. -# -#password "password@read,add,control,admin" -# -# This setting specifies the permissions a user has who has not yet logged in. -# -#default_permissions "read,add,control,admin" -# -############################################################################### - - -# Database ####################################################################### -# - -#database { -# plugin "proxy" -# host "other.mpd.host" -# port "6600" -#} - -# Input ####################################################################### -# - -input { - plugin "curl" -# proxy "proxy.isp.com:8080" -# proxy_user "user" -# proxy_password "password" -} - -# -############################################################################### - -# Audio Output ################################################################ -# -# MPD supports various audio output types, as well as playing through multiple -# audio outputs at the same time, through multiple audio_output settings -# blocks. Setting this block is optional, though the server will only attempt -# autodetection for one sound card. -# -# An example of an ALSA output: -# -audio_output { - type "alsa" - name "My ALSA Device" -## device "hw:0,0" # optional -## mixer_type "hardware" # optional -## mixer_device "default" # optional -## mixer_control "PCM" # optional -## mixer_index "0" # optional -} -# -# An example of an OSS output: -# -#audio_output { -# type "oss" -# name "My OSS Device" -## device "/dev/dsp" # optional -## mixer_type "hardware" # optional -## mixer_device "/dev/mixer" # optional -## mixer_control "PCM" # optional -#} -# -# An example of a shout output (for streaming to Icecast): -# -#audio_output { -# type "shout" -# encoding "ogg" # optional -# name "My Shout Stream" -# host "localhost" -# port "8000" -# mount "/mpd.ogg" -# password "hackme" -# quality "5.0" -# bitrate "128" -# format "44100:16:1" -## protocol "icecast2" # optional -## user "source" # optional -## description "My Stream Description" # optional -## url "http://example.com" # optional -## genre "jazz" # optional -## public "no" # optional -## timeout "2" # optional -## mixer_type "software" # optional -#} -# -# An example of a recorder output: -# -#audio_output { -# type "recorder" -# name "My recorder" -# encoder "vorbis" # optional, vorbis or lame -# path "/var/lib/mpd/recorder/mpd.ogg" -## quality "5.0" # do not define if bitrate is defined -# bitrate "128" # do not define if quality is defined -# format "44100:16:1" -#} -# -# An example of a httpd output (built-in HTTP streaming server): -# -#audio_output { -# type "httpd" -# name "My HTTP Stream" -# encoder "vorbis" # optional, vorbis or lame -# port "8000" -# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6 -## quality "5.0" # do not define if bitrate is defined -# bitrate "128" # do not define if quality is defined -# format "44100:16:1" -# max_clients "0" # optional 0=no limit -#} -# -# An example of a pulseaudio output (streaming to a remote pulseaudio server) -# -#audio_output { -# type "pulse" -# name "My Pulse Output" -## server "remote_server" # optional -## sink "remote_server_sink" # optional -#} -# -# An example of a winmm output (Windows multimedia API). -# -#audio_output { -# type "winmm" -# name "My WinMM output" -## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional -# or -## device "0" # optional -## mixer_type "hardware" # optional -#} -# -# An example of an openal output. -# -#audio_output { -# type "openal" -# name "My OpenAL output" -## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional -#} -# -## Example "pipe" output: -# -#audio_output { -# type "pipe" -# name "my pipe" -# command "aplay -f cd 2>/dev/null" -## Or if you're want to use AudioCompress -# command "AudioCompress -m | aplay -f cd 2>/dev/null" -## Or to send raw PCM stream through PCM: -# command "nc example.org 8765" -# format "44100:16:2" -#} -# -## An example of a null output (for no audio output): -# -#audio_output { -# type "null" -# name "My Null Output" -# mixer_type "none" # optional -#} -# -# If MPD has been compiled with libsamplerate support, this setting specifies -# the sample rate converter to use. Possible values can be found in the -# mpd.conf man page or the libsamplerate documentation. By default, this is -# setting is disabled. -# -#samplerate_converter "Fastest Sinc Interpolator" -# -############################################################################### - - -# Normalization automatic volume adjustments ################################## -# -# This setting specifies the type of ReplayGain to use. This setting can have -# the argument "off", "album", "track" or "auto". "auto" is a special mode that -# chooses between "track" and "album" depending on the current state of -# random playback. If random playback is enabled then "track" mode is used. -# See for more details about ReplayGain. -# This setting is off by default. -# -#replaygain "album" -replaygain "auto" -# -# This setting sets the pre-amp used for files that have ReplayGain tags. By -# default this setting is disabled. -# -#replaygain_preamp "0" -# -# This setting sets the pre-amp used for files that do NOT have ReplayGain tags. -# By default this setting is disabled. -# -#replaygain_missing_preamp "0" -# -# This setting enables or disables ReplayGain limiting. -# MPD calculates actual amplification based on the ReplayGain tags -# and replaygain_preamp / replaygain_missing_preamp setting. -# If replaygain_limit is enabled MPD will never amplify audio signal -# above its original level. If replaygain_limit is disabled such amplification -# might occur. By default this setting is enabled. -# -#replaygain_limit "yes" -# -# This setting enables on-the-fly normalization volume adjustment. This will -# result in the volume of all playing audio to be adjusted so the output has -# equal "loudness". This setting is disabled by default. -# -#volume_normalization "no" -# -############################################################################### - -# Character Encoding ########################################################## -# -# If file or directory names do not display correctly for your locale then you -# may need to modify this setting. -# -#filesystem_charset "UTF-8" -# -# This setting controls the encoding that ID3v1 tags should be converted from. -# -#id3v1_encoding "ISO-8859-1" -# -############################################################################### - - -# SIDPlay decoder ############################################################# -# -# songlength_database: -# Location of your songlengths file, as distributed with the HVSC. -# The sidplay plugin checks this for matching MD5 fingerprints. -# See http://www.c64.org/HVSC/DOCUMENTS/Songlengths.faq -# -# default_songlength: -# This is the default playing time in seconds for songs not in the -# songlength database, or in case you're not using a database. -# A value of 0 means play indefinitely. -# -# filter: -# Turns the SID filter emulation on or off. -# -#decoder { -# plugin "sidplay" -# songlength_database "/media/C64Music/DOCUMENTS/Songlengths.txt" -# default_songlength "120" -# filter "true" -#} -# -############################################################################### - diff --git a/config/ncmpcpp/.gitignore b/config/ncmpcpp/.gitignore deleted file mode 100644 index bdf6ba9..0000000 --- a/config/ncmpcpp/.gitignore +++ /dev/null @@ -1 +0,0 @@ -error.log diff --git a/config/ncmpcpp/bindings b/config/ncmpcpp/bindings deleted file mode 100644 index d0341e8..0000000 --- a/config/ncmpcpp/bindings +++ /dev/null @@ -1,568 +0,0 @@ -########################################################## -## this is example bindings configuration file, copy it ## -## to ~/.ncmpcpp/bindings and set up your preferences ## -########################################################## -## -##### General rules ##### -## -## 1) Because each action has runtime checks whether it's -## ok to run it, a few actions can be bound to one key. -## Actions will be bound in order given in configuration -## file. When a key is pressed, first action in order -## will test itself whether it's possible to run it. If -## test succeeds, action is executed and other actions -## bound to this key are ignored. If it doesn't, next -## action in order tests itself etc. -## -## 2) It's possible to bind more that one action at once -## to a key. It can be done using the following syntax: -## -## def_key "key" -## action1 -## action2 -## ... -## -## This creates a chain of actions. When such chain is -## executed, each action in chain is run until the end of -## chain is reached or one of its actions fails to execute -## due to its requirements not being met. If multiple actions -## and/or chains are bound to the same key, they will be -## consecutively run until one of them gets fully executed. -## -## 3) When ncmpcpp starts, bindings configuration file is -## parsed and then ncmpcpp provides "missing pieces" -## of default keybindings. If you want to disable some -## bindings, there is a special action called 'dummy' -## for that purpose. Eg. if you want to disable ability -## to crop playlists, you need to put the following -## into configuration file: -## -## def_key "C" -## dummy -## -## After that ncmpcpp will not bind any default action -## to this key. -## -## 4) To let you write simple macros, the following special -## actions are provided: -## -## - push_character "character" - pushes given special -## character into input queue, so it will be immediately -## picked by ncmpcpp upon next call to readKey function. -## Accepted values: mouse, up, down, page_up, page_down, -## home, end, space, enter, insert, delete, left, right, -## tab, ctrl-a, ctrl-b, ..., ctrl-z, ctrl-[, ctrl-\\, -## ctrl-], ctrl-^, ctrl-_, f1, f2, ..., f12, backspace. -## In addition, most of these names can be prefixed with -## alt-/ctrl-/shift- to be recognized with the appropriate -## modifier key(s). -## -## - push_characters "string" - pushes given string into -## input queue. -## -## - require_runnable "action" - checks whether given action -## is runnable and fails if it isn't. This is especially -## useful when mixed with previous two functions. Consider -## the following macro definition: -## -## def_key "key" -## push_characters "custom_filter" -## apply_filter -## -## If apply_filter can't be currently run, we end up with -## sequence of characters in input queue which will be -## treated just as we typed them. This may lead to unexpected -## results (in this case 'c' will most likely clear current -## playlist, 'u' will trigger database update, 's' will stop -## playback etc.). To prevent such thing from happening, we -## need to change above definition to this one: -## -## def_key "key" -## require_runnable "apply_filter" -## push_characters "custom_filter" -## apply_filter -## -## Here, first we test whether apply_filter can be actually run -## before we stuff characters into input queue, so if condition -## is not met, whole chain is aborted and we're fine. -## -## - require_screen "screen" - checks whether given screen is -## currently active. accepted values: browser, clock, help, -## media_library, outputs, playlist, playlist_editor, -## search_engine, tag_editor, visualizer, last_fm, lyrics, -## selected_items_adder, server_info, song_info, -## sort_playlist_dialog, tiny_tag_editor. -## -## - run_external_command "command" - runs given command using -## system() function. -## -## 5) In addition to binding to a key, you can also bind actions -## or chains of actions to a command. If it comes to commands, -## syntax is very similar to defining keys. Here goes example -## definition of a command: -## -## def_command "quit" [deferred] -## stop -## quit -## -## If you execute the above command (which can be done by -## invoking action execute_command, typing 'quit' and pressing -## enter), ncmpcpp will stop the player and then quit. Note the -## presence of word 'deferred' enclosed in square brackets. It -## tells ncmpcpp to wait for confirmation (ie. pressing enter) -## after you typed quit. Instead of 'deferred', 'immediate' -## could be used. Then ncmpcpp will not wait for confirmation -## (enter) and will execute the command the moment it sees it. -## -## Note: while command chains are executed, internal environment -## update (which includes current window refresh and mpd status -## update) is not performed for performance reasons. However, it -## may be desirable to do so in some situration. Therefore it's -## possible to invoke by hand by performing 'update enviroment' -## action. -## -## Note: There is a difference between: -## -## def_key "key" -## action1 -## -## def_key "key" -## action2 -## -## and -## -## def_key "key" -## action1 -## action2 -## -## First one binds two single actions to the same key whilst -## second one defines a chain of actions. The behavior of -## these two is different and is described in (1) and (2). -## -## Note: Function def_key accepts non-ascii characters. -## -##### List of unbound actions ##### -## -## The following actions are not bound to any key/command: -## -## - set_volume -## -# -#def_key "mouse" -# mouse_event -# -#def_key "up" -# scroll_up -def_key "k" - scroll_up -# -#def_key "shift-up" -# select_item -# scroll_up -# -#def_key "down" -# scroll_down -def_key "j" - scroll_down -# -#def_key "shift-down" -# select_item -# scroll_down -# -#def_key "[" -# scroll_up_album -# -#def_key "]" -# scroll_down_album -# -#def_key "{" -# scroll_up_artist -# -#def_key "}" -# scroll_down_artist -# -#def_key "page_up" -# page_up -# -#def_key "page_down" -# page_down -# -#def_key "home" -# move_home -def_key "h" - require_screen "browser" - move_home - enter_directory -# -#def_key "end" -# move_end -# -#def_key "insert" -# select_item -# -#def_key "enter" -# enter_directory -def_key "l" - require_screen "browser" - enter_directory -# -#def_key "enter" -# toggle_output -# -#def_key "enter" -# run_action -# -#def_key "enter" -# play_item -# -def_key "space" - require_screen "playlist" - select_item - scroll_down - -def_key "space" - add_item_to_playlist - -def_key "insert" - select_item - scroll_down -# -#def_key "space" -# toggle_lyrics_update_on_song_change -# -#def_key "space" -# toggle_visualization_type -# -#def_key "delete" -# delete_playlist_items -# -#def_key "delete" -# delete_browser_items -# -#def_key "delete" -# delete_stored_playlist -# -def_key "d" - delete_playlist_items - -def_key "d" - delete_browser_items - -def_key "d" - delete_stored_playlist -# -#def_key "right" -# next_column -# -#def_key "right" -# slave_screen -# -#def_key "right" -# volume_up -# -#def_key "+" -# volume_up -# -#def_key "left" -# previous_column -# -#def_key "left" -# master_screen -# -#def_key "left" -# volume_down -# -#def_key "-" -# volume_down -# -#def_key ":" -# execute_command -# -#def_key "tab" -# next_screen -# -#def_key "shift-tab" -# previous_screen -# -#def_key "f1" -# show_help -# -#def_key "1" -# show_playlist -# -#def_key "2" -# show_browser -# -#def_key "2" -# change_browse_mode -# -#def_key "3" -# show_search_engine -# -#def_key "3" -# reset_search_engine -# -#def_key "4" -# show_media_library -# -#def_key "4" -# toggle_media_library_columns_mode -# -#def_key "5" -# show_playlist_editor -# -#def_key "6" -# show_tag_editor -# -#def_key "7" -# show_outputs -# -#def_key "8" -# show_visualizer -# -#def_key "=" -# show_clock -# -#def_key "@" -# show_server_info -# -#def_key "s" -# stop -# -#def_key "p" -# pause -# -#def_key ">" -# next -# -#def_key "<" -# previous -# -#def_key "ctrl-h" -# jump_to_parent_directory -# -#def_key "ctrl-h" -# replay_song -# -#def_key "backspace" -# jump_to_parent_directory -# -#def_key "backspace" -# replay_song -# -#def_key "f" -# seek_forward -# -#def_key "b" -# seek_backward -# -#def_key "r" -# toggle_repeat -# -#def_key "z" -# toggle_random -# -#def_key "y" -# save_tag_changes -# -#def_key "y" -# start_searching -# -#def_key "y" -# toggle_single -# -#def_key "R" -# toggle_consume -# -#def_key "Y" -# toggle_replay_gain_mode -# -#def_key "T" -# toggle_add_mode -# -#def_key "|" -# toggle_mouse -# -#def_key "#" -# toggle_bitrate_visibility -# -#def_key "Z" -# shuffle -# -#def_key "x" -# toggle_crossfade -# -#def_key "X" -# set_crossfade -# -#def_key "u" -# update_database -# -#def_key "ctrl-s" -# sort_playlist -# -#def_key "ctrl-s" -# toggle_browser_sort_mode -# -#def_key "ctrl-s" -# toggle_media_library_sort_mode -# -#def_key "ctrl-r" -# reverse_playlist -# -#def_key "ctrl-_" -# select_found_items -# -#def_key "/" -# find -# -#def_key "/" -# find_item_forward -# -#def_key "?" -# find -# -#def_key "?" -# find_item_backward -# -#def_key "." -# next_found_item -# -#def_key "," -# previous_found_item -# -#def_key "w" -# toggle_find_mode -# -#def_key "e" -# edit_song -# -#def_key "e" -# edit_library_tag -# -#def_key "e" -# edit_library_album -# -#def_key "e" -# edit_directory_name -# -#def_key "e" -# edit_playlist_name -# -#def_key "e" -# edit_lyrics -# -#def_key "i" -# show_song_info -# -#def_key "I" -# show_artist_info -# -#def_key "g" -# jump_to_position_in_song -# -#def_key "l" -# show_lyrics -# -#def_key "ctrl-v" -# select_range -# -#def_key "v" -# reverse_selection -# -#def_key "V" -# remove_selection -# -#def_key "B" -# select_album -# -#def_key "a" -# add_selected_items -# -#def_key "c" -# clear_playlist -# -#def_key "c" -# clear_main_playlist -# -#def_key "C" -# crop_playlist -# -#def_key "C" -# crop_main_playlist -# -#def_key "m" -# move_sort_order_up -# -#def_key "m" -# move_selected_items_up -# -#def_key "m" -# set_visualizer_sample_multiplier -# -#def_key "n" -# move_sort_order_down -# -#def_key "n" -# move_selected_items_down -# -#def_key "M" -# move_selected_items_to -# -#def_key "A" -# add -# -#def_key "S" -# save_playlist -# -#def_key "o" -# jump_to_playing_song -# -#def_key "G" -# jump_to_browser -# -#def_key "G" -# jump_to_playlist_editor -# -#def_key "~" -# jump_to_media_library -# -#def_key "E" -# jump_to_tag_editor -# -#def_key "U" -# toggle_playing_song_centering -# -#def_key "P" -# toggle_display_mode -# -#def_key "\\" -# toggle_interface -# -#def_key "!" -# toggle_separators_between_albums -# -#def_key "L" -# toggle_lyrics_fetcher -# -#def_key "F" -# toggle_fetching_lyrics_in_background -# -#def_key "ctrl-l" -# toggle_screen_lock -# -#def_key "`" -# toggle_library_tag_type -# -#def_key "`" -# refetch_lyrics -# -#def_key "`" -# add_random_items -# -#def_key "ctrl-p" -# set_selected_items_priority -# -#def_key "q" -# quit -# diff --git a/config/ncmpcpp/config b/config/ncmpcpp/config deleted file mode 100644 index f797cbf..0000000 --- a/config/ncmpcpp/config +++ /dev/null @@ -1,341 +0,0 @@ -#################################################### -## this is example configuration file, copy it to ## -## ~/.ncmpcpp/config and set up your preferences ## -#################################################### - -##### directories ###### {{{ -## Directory for storing ncmpcpp related files. -## Changing it is useful if you want to store -## everything somewhere else and provide command -## line setting for alternative location to config -## file which defines that while launching ncmpcpp. -ncmpcpp_directory = ~/.config/ncmpcpp -## Directory for storing downloaded lyrics. It -## defaults to ~/.lyrics since other MPD clients -## (eg. ncmpc) also use that location. -#lyrics_directory = ~/.lyrics -# }}} - -##### connection settings ##### {{{ -#mpd_host = localhost -#mpd_port = 6600 -#mpd_connection_timeout = 5 -## Needed for tag editor and file operations to work. -mpd_music_dir = /data/music -#mpd_crossfade_time = 5 -# }}} - -##### music visualizer ##### {{{ -## Note: In order to make music visualizer work you'll -## need to use mpd fifo output, whose format parameter -## has to be set to 44100:16:1 for mono visualization -## or 44100:16:2 for stereo visualization. Example -## configuration (it has to be put into mpd.conf): -## -## audio_output { -## type "fifo" -## name "Visualizer feed" -## path "/tmp/mpd.fifo" -## format "44100:16:2" -## } -#visualizer_fifo_path = /tmp/mpd.fifo -## Note: Below parameter is needed for ncmpcpp -## to determine which output provides data for -## visualizer and thus allow syncing between -## visualization and sound as currently there -## are some problems with it. -#visualizer_output_name = Visualizer feed -## If you set format to 44100:16:2, make it 'yes'. -#visualizer_in_stereo = yes -## Multiply received samples by given value. Very -## useful for proper visualization of quiet music. -#visualizer_sample_multipler = 1 -## Note: Below parameter defines how often ncmpcpp -## has to "synchronize" visualizer and audio outputs. -## 30 seconds is optimal value, but if you experience -## synchronization problems, set it to lower value. -## Keep in mind that sane values start with >=10. -#visualizer_sync_interval = 30 -## Note: To enable spectrum frequency visualization -## you need to compile ncmpcpp with fftw3 support. -## Available values: spectrum, wave. -#visualizer_type = wave -#visualizer_look = ●▮ -# }}} - -##### system encoding ##### {{{ -## ncmpcpp should detect your charset encoding -## but if it failed to do so, you can specify -## charset encoding you are using here. -## -## Note: You can see whether your ncmpcpp build -## supports charset detection by checking output -## of `ncmpcpp --version`. -## -## Note: Since MPD uses UTF-8 by default, setting -## this option makes sense only if your encoding -## is different. -#system_encoding = "" -# }}} - -##### delays ##### {{{ -## Time of inactivity (in seconds) after playlist -## highlighting will be disabled (0 = always on). -#playlist_disable_highlight_delay = 5 -## Defines how long messages are supposed to be visible. -#message_delay_time = 5 -# }}} - -##### song format ##### {{{ -## for song format you can use: -## -## %l - length -## %f - filename -## %D - directory -## %a - artist -## %A - album artist -## %t - title -## %b - album -## %y - date -## %n - track number (01/12 -> 01) -## %N - full track info (01/12 -> 01/12) -## %g - genre -## %c - composer -## %p - performer -## %d - disc -## %C - comment -## %P - priority -## $R - begin right alignment -## -## you can also put them in { } and then it will be displayed -## only if all requested values are available and/or define alternate -## value with { }|{ } eg. {%a - %t}|{%f} -## -## Note: If you want to set limit on maximal length of a tag, just -## put the appropriate number between % and character that defines -## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'. -## -## Note: Format that is similar to "%a - %t" (i.e. without any additional -## braces) is equal to "{%a - %t}", so if one of the tags is missing, -## you'll get nothing. -## -## text can also have different color than the main window has, -## eg. if you want length to be green, write "$3%l$9". -## -## Available values: -## -## - 0 - default window color (discards all other colors) -## - 1 - black -## - 2 - red -## - 3 - green -## - 4 - yellow -## - 5 - blue -## - 6 - magenta -## - 7 - cyan -## - 8 - white -## - 9 - end of current color -## -## Note: colors can be nested. -#song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9} -#song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f} -#song_library_format = {%n - }{%t}|{%f} -#tag_editor_album_format = {(%y) }%b -## Note: Below variables are used for sorting songs in browser. -## The sort mode determines how songs are sorted, and can be used -## in combination with a sort format to specify a custom sorting format. -## Available values for browser_sort_mode are "name", "mtime", "format" -## and "noop". -#browser_sort_mode = name -#browser_sort_format = {%a - }{%t}|{%f} {(%l)} -## Note: Below variables are for alternative version of user's interface. -## Their syntax supports all tags and colors listed above plus some extra -## markers used for text attributes. They are followed by character '$'. -## After that you can put: -## -## - b - bold text -## - u - underline text -## - r - reverse colors -## - a - use alternative character set -## -## If you don't want to use an attribute anymore, just put it again, but -## this time insert character '/' between '$' and attribute character, -## e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag or filename -## with reversed colors. -#alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b -#alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D} -## Note: below variables also support text attributes listed above. -#now_playing_prefix = $b -#now_playing_suffix = $/b -#browser_playlist_prefix = "$2playlist$9 " -#selected_item_prefix = $6 -#selected_item_suffix = $9 -#modified_item_prefix = $3> $9 -## Note: colors are not supported for below variable. -#song_window_title_format = {%a - }{%t}|{%f} -# }}} - -##### columns settings ##### {{{ -## syntax of song columns list format is "column column etc." -## -## - syntax for each column is: -## -## (width of column)[column's color]{displayed tag} -## -## Note: Width is by default in %, if you want a column to -## have fixed size, add 'f' after the value, e.g. (10)[white]{a} -## will be the column that take 10% of screen (so the real column's -## width will depend on actual screen size), whereas (10f)[white]{a} -## will take 10 terminal cells, no matter how wide the screen is. -## -## - color is optional (if you want the default one, type []) -## -## Note: You can give a column additional attributes by putting appropriate -## character after displayed tag character. Available attributes are: -## -## - r - column will be right aligned -## - E - if tag is empty, empty tag marker won't be displayed -## -## You can also: -## -## - give a column custom name by putting it after attributes, -## separated with character ':', e.g. {lr:Length} gives you -## right aligned column of lengths named "Length". -## -## - define sequence of tags, that have to be displayed in case -## predecessor is empty in a way similar to the one in classic -## song format, i.e. using '|' character, e.g. {a|c|p:Owner} -## creates column named "Owner" that tries to display artist -## tag and then composer and performer if previous ones are -## not available. -#song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l} -song_columns_list_format = (16)[]{a} (10f)[green]{NrE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l} -# }}} - -##### various settings ##### {{{ -## Note: Custom command that will be executed each -## time song changes. Useful for notifications etc. -## -## Attention: It doesn't support song format anymore. -## Use `ncmpcpp --now-playing SONG_FORMAT` instead. -#execute_on_song_change = "" -#playlist_show_remaining_time = no -#playlist_shorten_total_times = no -#playlist_separate_albums = no -## Note: Possible display modes: classic, columns. -#playlist_display_mode = columns -browser_display_mode = columns -#search_engine_display_mode = classic -#playlist_editor_display_mode = classic -#discard_colors_if_item_is_selected = yes -#incremental_seeking = yes -#seek_time = 1 -#volume_change_step = 2 -#autocenter_mode = no -#centered_cursor = no -## Note: You can specify third character which will -## be used to build 'empty' part of progressbar. -progressbar_look = =- -progressbar_boldness = no -## Available values: database, playlist. -#default_place_to_search_in = database -## Available values: classic, alternative. -user_interface = alternative -#data_fetching_delay = yes -## Available values: artist, album_artist, date, genre, composer, performer. -media_library_primary_tag = genre -## Available values: wrapped, normal. -#default_find_mode = wrapped -## Available values: add, select. -#default_tag_editor_pattern = %n - %t -#header_visibility = yes -#statusbar_visibility = yes -#titles_visibility = yes -#header_text_scrolling = yes -#cyclic_scrolling = no -#lines_scrolled = 2 -#follow_now_playing_lyrics = no -#fetch_lyrics_for_current_song_in_background = no -#store_lyrics_in_song_dir = no -#generate_win32_compatible_filenames = yes -#allow_for_physical_item_deletion = no -## Note: If you set this variable, ncmpcpp will try to -## get info from last.fm in language you set and if it -## fails, it will fall back to english. Otherwise it will -## use english the first time. -## -## Note: Language has to be expressed as an ISO 639 alpha-2 code. -#lastfm_preferred_language = en -## Available values: add_remove, always_add. -#space_add_mode = always_add -#show_hidden_files_in_local_browser = no -## How shall screen switcher work? -## - "previous" - switch between the current and previous screen. -## - "screen1,...,screenN" - switch between given sequence of screens. -## -## Screens available for use: help, playlist, browser, search_engine, -## media_library, playlist_editor, tag_editor, outputs, visualizer, clock. -screen_switcher_mode = playlist, media_library -## Note: You can define startup screen for ncmpcpp -## by choosing screen from the list above. -#startup_screen = playlist -## Default width of locked screen (in %). -## Acceptable values are from 20 to 80. -#locked_screen_width_part = 50 -#ask_for_locked_screen_width_part = yes -#jump_to_now_playing_song_at_start = yes -#ask_before_clearing_playlists = yes -clock_display_seconds = yes -#display_volume_level = yes -#display_bitrate = no -#display_remaining_time = no -## Available values: none, basic, extended. -#regular_expressions = none -## Note: If below is enabled, ncmpcpp will ignore leading -## "The" word while sorting items in browser, tags in -## media library, etc. -#ignore_leading_the = no -#block_search_constraints_change_if_items_found = yes -mouse_support = no -#mouse_list_scroll_whole_page = yes -#empty_tag_marker = -#tags_separator = " | " -#tag_editor_extended_numeration = no -#media_library_sort_by_mtime = no -#enable_window_title = yes -## Note: You can choose default search mode for search -## engine. Available modes are: -## -## - 1 - use mpd built-in searching (no regexes, pattern matching) -## - 2 - use ncmpcpp searching (pattern matching with support for regexes, -## but if your mpd is on a remote machine, downloading big database -## to process it can take a while -## - 3 - match only exact values (this mode uses mpd function for searching -## in database and local one for searching in current playlist) -#search_engine_default_search_mode = 1 -external_editor = vim -## Note: set to yes if external editor is a console application. -#use_console_editor = yes -# }}} - -##### colors definitions ##### {{{ -#colors_enabled = yes -#empty_tag_color = cyan -#header_window_color = default -#volume_color = default -#state_line_color = default -#state_flags_color = default -#main_window_color = yellow -#color1 = white -#color2 = green -#main_window_highlight_color = yellow -#progressbar_color = black -#progressbar_elapsed_color = green -#statusbar_color = default -#alternative_ui_separator_color = black -#active_column_color = red -#visualizer_color = yellow -#window_border_color = green -#active_window_border = red -# }}} - -# vim: foldmethod=marker