46 lines
1.8 KiB
Markdown
46 lines
1.8 KiB
Markdown
## Components
|
|
|
|
The BIOS is in the uppermost 2K of the memory area - it provides basic character and disk I/O functions.
|
|
It it expected to stay static and not be unloaded by the user program.
|
|
The BIOS may hook into interrupts if necessary to provide its functionality.
|
|
Depending on your hardware, a different BIOS binary may be used.
|
|
|
|
The BDOS is in the 2K below the BIOS, it provides a filesystem driver to work atop of the BIOS.
|
|
It is agnostic to the underlaying hardware configuration, but different depending on the instruction set.
|
|
A user program might overwrite memory up to the end of the BDOS.
|
|
Upon program exit, the BIOS will reload the BDOS from disk.
|
|
|
|
## Memory Layout
|
|
|
|
On a 8080, there are no segments, the addresses are as displayed.
|
|
|
|
On on the 8086, a single segment with a value of 0x0100 is assumed.
|
|
This implies that the first 4k of memory are not used.
|
|
|
|
The BIOS and BDOS may be recompiled for starting at a lower address, in this case,
|
|
the minimum memory requirement may be less than 64k.
|
|
|
|
|Start |Size |Function|
|
|
|------|---------|--------|
|
|
|0xF800|2k |BIOS / hw drivers|
|
|
|0xF000|2k |BDOS|
|
|
|... |... |BDOS data area, disk deblocking buffers|
|
|
|SP |var |Stack, growing down|
|
|
|... |... |Free memory|
|
|
|... |var |Heap, growing up|
|
|
|0x0100|var |Transient Program Area|
|
|
|0x0080|128 bytes|Command line and disk buffer|
|
|
|0x006C|20 bytes |Pre-filled FCB 2|
|
|
|0x005C|16 bytes |Pre-filled FCB 1|
|
|
|0x0008|84 bytes |BIOS data area, specific to BIOS implementation|
|
|
|0x0005|3 bytes |Jump code for BDOS|
|
|
|0x0004|1 byte |default drive for BDOS|
|
|
|0x0003|1 byte |may be used as iobyte by BIOS|
|
|
|0x0000|3 bytes |Jump to BIOS warm boot entry point / program exit|
|
|
|
|
## Application program interface
|
|
|
|
It is using the `call 5` convention with CP/M compatible syscall numbers.
|
|
|
|
File I/O is done via FCB blocks.
|