replace ncmpcpp with vimus

config/ncmpcpp/.gitignore

@@ -1 +0,0 @@
-error.log

config/ncmpcpp/config

@@ -1,341 +0,0 @@
-####################################################
-## this is example configuration file, copy it to ##
-## ~/.ncmpcpp/config and set up your preferences  ##
-####################################################
-
-##### directories ###### {{{
-## Directory for storing ncmpcpp related files.
-## Changing it is useful if you want to store
-## everything somewhere else and provide command
-## line setting for alternative location to config
-## file which defines that while launching ncmpcpp.
-ncmpcpp_directory = ~/.config/ncmpcpp
-## Directory for storing downloaded lyrics. It
-## defaults to ~/.lyrics since other MPD clients
-## (eg. ncmpc) also use that location.
-#lyrics_directory = ~/.lyrics
-# }}}
-
-##### connection settings ##### {{{
-#mpd_host = localhost
-#mpd_port = 6600
-#mpd_connection_timeout = 5
-## Needed for tag editor and file operations to work.
-mpd_music_dir = /mnt/lexicon/Music
-#mpd_crossfade_time = 5
-# }}}
-
-##### music visualizer ##### {{{
-## Note: In order to make music visualizer work you'll
-## need to use mpd fifo output, whose format parameter
-## has to be set to 44100:16:1 for mono visualization
-## or 44100:16:2 for stereo visualization. Example
-## configuration (it has to be put into mpd.conf):
-##
-## audio_output {
-##        type            "fifo"
-##        name            "Visualizer feed"
-##        path            "/tmp/mpd.fifo"
-##        format          "44100:16:2"
-## }
-#visualizer_fifo_path = /tmp/mpd.fifo
-## Note: Below parameter is needed for ncmpcpp
-## to determine which output provides data for
-## visualizer and thus allow syncing between
-## visualization and sound as currently there
-## are some problems with it.
-#visualizer_output_name = Visualizer feed
-## If you set format to 44100:16:2, make it 'yes'.
-#visualizer_in_stereo = yes
-## Multiply received samples by given value. Very
-## useful for proper visualization of quiet music.
-#visualizer_sample_multipler = 1
-## Note: Below parameter defines how often ncmpcpp
-## has to "synchronize" visualizer and audio outputs.
-## 30 seconds is optimal value, but if you experience
-## synchronization problems, set it to lower value.
-## Keep in mind that sane values start with >=10.
-#visualizer_sync_interval = 30
-## Note: To enable spectrum frequency visualization
-## you need to compile ncmpcpp with fftw3 support.
-## Available values: spectrum, wave.
-#visualizer_type = wave
-#visualizer_look = ●▮
-# }}}
-
-##### system encoding ##### {{{
-## ncmpcpp should detect your charset encoding
-## but if it failed to do so, you can specify
-## charset encoding you are using here.
-##
-## Note: You can see whether your ncmpcpp build
-## supports charset detection by checking output
-## of `ncmpcpp --version`.
-##
-## Note: Since MPD uses UTF-8 by default, setting
-## this option makes sense only if your encoding
-## is different.
-#system_encoding = ""
-# }}}
-
-##### delays ##### {{{
-## Time of inactivity (in seconds) after playlist
-## highlighting will be disabled (0 = always on).
-#playlist_disable_highlight_delay = 5
-## Defines how long messages are supposed to be visible.
-#message_delay_time = 5
-# }}}
-
-##### song format ##### {{{
-## for song format you can use:
-##
-## %l - length
-## %f - filename
-## %D - directory
-## %a - artist
-## %A - album artist
-## %t - title
-## %b - album
-## %y - date
-## %n - track number (01/12 -> 01)
-## %N - full track info (01/12 -> 01/12)
-## %g - genre
-## %c - composer
-## %p - performer
-## %d - disc
-## %C - comment
-## %P - priority
-## $R - begin right alignment
-##
-## you can also put them in { } and then it will be displayed
-## only if all requested values are available and/or define alternate
-## value with { }|{ } eg. {%a - %t}|{%f}
-##
-## Note: If you want to set limit on maximal length of a tag, just
-## put the appropriate number between % and character that defines
-## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
-##
-## Note: Format that is similar to "%a - %t" (i.e. without any additional
-## braces) is equal to "{%a - %t}", so if one of the tags is missing,
-## you'll get nothing.
-##
-## text can also have different color than the main window has,
-## eg. if you want length to be green, write "$3%l$9".
-##
-## Available values:
-##
-## - 0 - default window color (discards all other colors)
-## - 1 - black
-## - 2 - red
-## - 3 - green
-## - 4 - yellow
-## - 5 - blue
-## - 6 - magenta
-## - 7 - cyan
-## - 8 - white
-## - 9 - end of current color
-##
-## Note: colors can be nested.
-#song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
-#song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
-#song_library_format = {%n - }{%t}|{%f}
-#tag_editor_album_format = {(%y) }%b
-## Note: Below variables are used for sorting songs in browser.
-## The sort mode determines how songs are sorted, and can be used
-## in combination with a sort format to specify a custom sorting format.
-## Available values for browser_sort_mode are "name", "mtime", "format"
-## and "noop".
-#browser_sort_mode = name
-#browser_sort_format = {%a - }{%t}|{%f} {(%l)}
-## Note: Below variables are for alternative version of user's interface.
-## Their syntax supports all tags and colors listed above plus some extra
-## markers used for text attributes. They are followed by character '$'.
-## After that you can put:
-##
-## - b - bold text
-## - u - underline text
-## - r - reverse colors
-## - a - use alternative character set
-##
-## If you don't want to use an attribute anymore, just put it again, but
-## this time insert character '/' between '$' and attribute character,
-## e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag or filename
-## with reversed colors.
-#alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
-#alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
-## Note: below variables also support text attributes listed above.
-#now_playing_prefix = $b
-#now_playing_suffix = $/b
-#browser_playlist_prefix = "$2playlist$9 "
-#selected_item_prefix = $6
-#selected_item_suffix = $9
-#modified_item_prefix = $3> $9
-## Note: colors are not supported for below variable.
-#song_window_title_format = {%a - }{%t}|{%f}
-# }}}
-
-##### columns settings ##### {{{
-## syntax of song columns list format is "column column etc."
-##
-## - syntax for each column is:
-##
-## (width of column)[column's color]{displayed tag}
-##
-## Note: Width is by default in %, if you want a column to
-## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
-## will be the column that take 10% of screen (so the real column's
-## width will depend on actual screen size), whereas (10f)[white]{a}
-## will take 10 terminal cells, no matter how wide the screen is.
-##
-## - color is optional (if you want the default one, type [])
-##
-## Note: You can give a column additional attributes by putting appropriate
-## character after displayed tag character. Available attributes are:
-##
-## - r - column will be right aligned
-## - E - if tag is empty, empty tag marker won't be displayed
-##
-## You can also:
-##
-## - give a column custom name by putting it after attributes,
-##   separated with character ':', e.g. {lr:Length} gives you
-##   right aligned column of lengths named "Length".
-##
-## - define sequence of tags, that have to be displayed in case
-##   predecessor is empty in a way similar to the one in classic
-##   song format, i.e. using '|' character, e.g. {a|c|p:Owner}
-##   creates column named "Owner" that tries to display artist
-##   tag and then composer and performer if previous ones are
-##   not available.
-#song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
-# }}}
-
-##### various settings ##### {{{
-## Note: Custom command that will be executed each
-## time song changes. Useful for notifications etc.
-##
-## Attention: It doesn't support song format anymore.
-## Use `ncmpcpp --now-playing SONG_FORMAT` instead.
-#execute_on_song_change = ""
-#playlist_show_remaining_time = no
-#playlist_shorten_total_times = no
-#playlist_separate_albums = no
-## Note: Possible display modes: classic, columns.
-#playlist_display_mode = columns
-browser_display_mode = columns
-#search_engine_display_mode = classic
-#playlist_editor_display_mode = classic
-#discard_colors_if_item_is_selected = yes
-#incremental_seeking = yes
-#seek_time = 1
-#volume_change_step = 2
-#autocenter_mode = no
-#centered_cursor = no
-## Note: You can specify third character which will
-## be used to build 'empty' part of progressbar.
-progressbar_look = =-
-progressbar_boldness = no
-## Available values: database, playlist.
-#default_place_to_search_in = database
-## Available values: classic, alternative.
-user_interface = alternative
-#data_fetching_delay = yes
-## Available values: artist, album_artist, date, genre, composer, performer.
-media_library_primary_tag = genre
-## Available values: wrapped, normal.
-#default_find_mode = wrapped
-## Available values: add, select.
-default_space_mode = select
-#default_tag_editor_pattern = %n - %t
-#header_visibility = yes
-#statusbar_visibility = yes
-#titles_visibility = yes
-#header_text_scrolling = yes
-#cyclic_scrolling = no
-#lines_scrolled = 2
-#follow_now_playing_lyrics = no
-#fetch_lyrics_for_current_song_in_background = no
-#store_lyrics_in_song_dir = no
-#generate_win32_compatible_filenames = yes
-#allow_for_physical_item_deletion = no
-## Note: If you set this variable, ncmpcpp will try to
-## get info from last.fm in language you set and if it
-## fails, it will fall back to english. Otherwise it will
-## use english the first time.
-##
-## Note: Language has to be expressed as an ISO 639 alpha-2 code.
-#lastfm_preferred_language = en
-## Available values: add_remove, always_add.
-#space_add_mode = always_add
-#show_hidden_files_in_local_browser = no
-## How shall screen switcher work?
-## - "previous" - switch between the current and previous screen.
-## - "screen1,...,screenN" - switch between given sequence of screens.
-##
-## Screens available for use: help, playlist, browser, search_engine,
-## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
-screen_switcher_mode = playlist, media_library
-## Note: You can define startup screen for ncmpcpp
-## by choosing screen from the list above.
-#startup_screen = playlist
-## Default width of locked screen (in %).
-## Acceptable values are from 20 to 80.
-#locked_screen_width_part = 50
-#ask_for_locked_screen_width_part = yes
-#jump_to_now_playing_song_at_start = yes
-#ask_before_clearing_playlists = yes
-clock_display_seconds = yes
-#display_volume_level = yes
-#display_bitrate = no
-#display_remaining_time = no
-## Available values: none, basic, extended.
-#regular_expressions = none
-## Note: If below is enabled, ncmpcpp will ignore leading
-## "The" word while sorting items in browser, tags in
-## media library, etc.
-#ignore_leading_the = no
-#block_search_constraints_change_if_items_found = yes
-mouse_support = no
-#mouse_list_scroll_whole_page = yes
-#empty_tag_marker = <empty>
-#tags_separator = " | "
-#tag_editor_extended_numeration = no
-#media_library_sort_by_mtime = no
-#enable_window_title = yes
-## Note: You can choose default search mode for search
-## engine. Available modes are:
-##
-## - 1 - use mpd built-in searching (no regexes, pattern matching)
-## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
-##       but if your mpd is on a remote machine, downloading big database
-##       to process it can take a while
-## - 3 - match only exact values (this mode uses mpd function for searching
-##       in database and local one for searching in current playlist)
-#search_engine_default_search_mode = 1
-external_editor = vim
-## Note: set to yes if external editor is a console application.
-#use_console_editor = yes
-# }}}
-
-##### colors definitions ##### {{{
-#colors_enabled = yes
-#empty_tag_color = cyan
-#header_window_color = default
-#volume_color = default
-#state_line_color = default
-#state_flags_color = default
-#main_window_color = yellow
-#color1 = white
-#color2 = green
-#main_window_highlight_color = yellow
-#progressbar_color = black
-#progressbar_elapsed_color = green
-#statusbar_color = default
-#alternative_ui_separator_color = black
-#active_column_color = red
-#visualizer_color = yellow
-#window_border_color = green
-#active_window_border = red
-# }}}
-
-# vim: foldmethod=marker

config/xmobar/scripts/music

@@ -5,6 +5,6 @@ if mpc -q; then
         "playing") icon="<icon=music/play.xpm/>"  ;;
         *)         icon="<icon=music/pause.xpm/>" ;;
     esac
-    echo '<action=`urxvtc -e "ncmpcpp" "-c" "~/.config/ncmpcpp/config"`>'"$icon"'</action>'
+    echo '<action=`urxvtc -e "vimus"`>'"$icon"'</action>'
 fi
 

local/bin/vimus

@@ -0,0 +1 @@
+/home/felix/Programming/vimus/dist/dist-sandbox-b7985571/build/vimus/vimus

vimusrc

@@ -0,0 +1,12 @@
+
+set-library-path /mnt/lexicon/Music
+
+# a light-on-dark color scheme
+color tab green black
+color main cyan black
+color ruler green black
+color songstatus blue black
+color playstatus blue black
+color error white red
+color input white black
+color suggestions green black

xmonad/xmonad.hs

@@ -111,6 +111,7 @@ myScratchPads =
     , interm "weechat"    centerFloating
     , interm "sup"        centerFloating
     , interm "newsbeuter" centerFloating
+    , interm "vimus" centerFloating
     ]
   where
     centerFloating = customFloating $ W.RationalRect 0.05 0.05 0.9 0.9 -- x, y, w, h
@@ -202,6 +203,7 @@ myKeys conf@(XConfig {XMonad.modMask = modm}) = M.fromList $
     , ((modm .|. controlMask, xK_b), namedScratchpadAction myScratchPads "ranger")
     , ((modm .|. controlMask, xK_m), namedScratchpadAction myScratchPads "sup")
     , ((modm .|. controlMask, xK_n), namedScratchpadAction myScratchPads "newsbeuter")
+    , ((modm .|. controlMask, xK_v), namedScratchpadAction myScratchPads "vimus")
 
     -- Dmenu open programs
     , ((modm .|. shiftMask, xK_Tab), gotoMenuArgs ["-l", "10"])